UE46_MAXYMUS Beamline

For more details and current status contact the beamline scientist(s).

PGM2-Beamline optical design

PGM2-Beamline optical design



(MAgnetic X-raY Microscope with UHV Spectroscopy) is a scanning transmission x-ray microscope (STXM) and a fixed endstation of the UE46-PGM2 undulator beamline. MAXYMUS has been installed in cooperation of BESSY II and MAX-PLANCK-SOCIETY in 2009, with Prof. Dr. Gisela Schütz, head of the department "Modern Magnetic Systems", Director and Scientific Member at Max-Planck-Institut for Intelligent Systems in Stuttgart in charge.

MAXYMUS operates by focusing a coherent x-ray beam to nanometer-sized spots which are scanned across sample. To probe the local x-ray absorption, light passing through the sample is measured for each point by a variety of available x-ray detectors including photomultiplier, avalanche diode or in-vacuum CCD camera.

This allows to use x-ray spectroscopic techniques as contrast mechanism, making it possible to do element specific, chemically and magnetically sensitive imaging with resolutions below 20 nm.

MAXYMUS has been in continuously improved since entering user operation since 2011 and is open for proposals.

MAXYMUS Microscope in UHV Configuration with Sample Transfer Chamber

MAXYMUS Microscope in UHV Configuration with Sample Transfer Chamber

MAXYMUS internals as seen through open hatch

MAXYMUS internals as seen through open hatch


MAXYMUS endstation allows users to utilize XMCD and NEXAFS contrast mechanisms both for imaging and for nano-spectroscopy of samples, in the energy range between 150 and 1900 eV and on sub 30nm length scales.

Samples can be transparent (the classical mode) as well as bulk, with imaging being done by sample current measurement (TEY - total electron yield).

Scan options include NEXAFS point and line profiles as well as automated NEXAFS stacks (i.e. a full image is taken for each energy point, allowing extraction of spectra for arbitrary areas of interest in post processing).

In particular for XMCD, angled illumination of the sample
is possible for imaging of in-plane magnetization.

The endstation includes a fully featured RF-pump-and-probe setup for time resolved imaging of magneto dynamics.
Giving the user full control and wide flexibility in terms of repetition rates and resolutions [1,3], time resolutions <100ps and spatial resolutions <30nm are operational.
For low photon energies, an efficient photomultiplier detector allows imaging down to the sulfur k-edge. Together with the high flux beamline with reduced carbon absorption, this allows fast aquisition even in low-flux operation modes of BESSY [2].

Beamline Energy Range
150 - 1900 [eV]
Markus Weigand
Dr. Joachim Gräfe
  • Time-resolved studies
  • XMCD
Emission or Reflection
  • X-ray fluorescence (XRF)
  • X-ray microscopy
Photoelectron emission
  • XPS
control/Data analysis
Control Software Type
  • tbc
Data Output Type
  • tbc
Data Output Format
  • tbc